Pin assignments on the sensor with CAN / CANopen / SAE J1939
The pin configuration complies with the requirements of the relevant standards.
| Pin | Color in the standardized CAN cable | CAN, CANopen, SAE J1939 |
| 1 | Shield | CAN_Shield |
| 2 | red | CAN_V+ |
| 3 | black | CAN_GND |
| 4 | white | CAN_H |
| 5 | blue | CAN_L |
We recommend using standard CAN connection cables.
Pin assignment on the sensor with current or voltage output
| Pin | current / votage | Note |
| 1 | V+ | Supply voltage +24V |
| 2 | B-Out | Sensor Output B (Standard Y) |
| 3 | V- | Supply voltage ground / Sensor ground |
| 4 | A-Out | Sensor Output A (Standard X) |
| 5 | Teach | Input for zero-point adjustment |
Connection current output
Connection voltage sensor
Pin assignment on the inclination switch
| Pin | | |
| 1 | A+ | Switch output A + |
| 2 | A- | Switch output A – |
| 3 | B+ | Switch outputB + |
| 4 | B- | Switch output B – |
| 5 | T1 | Signal Programmer |
| 6 | T2 | Signal Programmer |
| 7 | GND | Mass |
| 8 | V+ | Power supply |
